Just another WordPress.com site

Bassinet fitted sheets

I purchased a bassinet for the baby from craigslist.com and it only came with one fitted sheet.  I have been repeatedly assured by others with babies that we can expect “blow-outs” from diapers and that we should have extra sheets on hand for quick changes.  A quick examination of the sheet that came with the bassinet showed the construction was pretty simple so I decided to make some extra sheets.  I bought some yellow knit fabric and some cute patterned knit fabric from JoAnn’s.  It was my lucky day because the fabric was half price and I only spent $12 for one yard of each fabric and some elastic for the edges.  I priced fitted bassinet sheets at Babies R Us and the cost was $8.99 for one and $15.99 for two.

Making them was very simple. This works for a fairly flat bassinet mattress.   Take the bassinet mattress and trace the outline on a large sheet of paper then cut it out and use it as a pattern to cut out the sheet top.  Do not add any seam allowance, you want to have a tight sheet so the baby can’t wiggle it around and become entangled.  If you are trying to get two sheets out of a yard as I did you may want to experiment with layout a bit before you begin cutting so that you leave as much leftover fabric as possible to cut the strips for the sides.Cut strips of fabric about 4 inches wide from the remainder of the fabric and sew the 4 inch ends together to form one long strip of each.  Keep the right sides together!

If you have a serger, attach the long edge of the fabric to the outer edge of the top of the bassinet sheet, going all the way around the perimeter.  If you do not have a serger you can use a standard sewing machine with a zig zag stitch.  Keep close to the edge of the fabric.  Sew the ends together when they meet.

I did not insert elastic all the way around, as you can see from this picture.

I stitched the elastic down at the starting point.

Then put a safety pin in the other end of the elastic.

After that I sewed a casing around the short end of the bassinet sheet, enclosing the elastic as I went.  Because I stretched the elastic to fit after I reached the other side the elastic was completely enclosed before I was done stitching.  Be sure not to catch the elastic with the stitching as you go and stitch to approximately the same spot on the opposite side as the spot you started from.  Using the safety-pin to help manuever the elastic, pull the elastic through to the stopping point and stitch it down.

Repeat on the other side and then stitch down the sections on the long ends that didn’t get threaded with elastic.  Done!

I also made these sheets out of some cute patterned fabric.

Now all I need is a baby to put in this cute bassinet!


Comments on: "Bassinet fitted sheets" (1)

  1. Amelia, we have that identical bassinet (borrowed from friends) for Gianna, and it is great! In fact, she’s still sleeping in it, at 4+ months – it’s great to have her so close, and I think it makes nighttime feedings much easier.

    Getting so excited to hear that your little guy has arrived! 🙂

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: